Serving Las Vegas & the entire valley · Sun–Fri 7am–7pm · Sat closed protechgaragelasvegas@gmail.com

Commercial Door Installation

Commercial doors are spec'd, not shopped — cycles per day, security rating, wind load, clearances and code all come before color. Here's how we build the spec with you.

The Spec Conversation

  1. Traffic & duty

    Cycles per day, peak periods, what passes through (people, forklifts, box trucks). This sets spring cycle rating and operator duty class.

  2. Opening & clearances

    Measured opening, headroom, side room, and what's living on the ceiling — the geometry that picks roll-up vs. sectional and track style.

  3. Environment

    Conditioned or not (insulation, seals), wind exposure, sun orientation, washdown or corrosive conditions (finish and hardware choices).

  4. Security & safety

    Locking, vision panels, photo eyes and sensing edges, manual operation for outages, and any fire-rating requirements.

  5. Appearance

    Finish, glazing, and how the door reads to customers — last in the spec, but not unimportant on a storefront.

Installation Standards

  • Commercial track and hardware anchored to structure (steel or masonry as the building offers), not to whatever drywall was nearby.
  • Springs sized to measured curtain/panel weight with the cycle rating the traffic demands.
  • Operators installed with proper safety entrapment protection — photo eyes and/or sensing edges per operator class — plus chain hoist for outage operation where appropriate.
  • Full commissioning: balance, limits, force, safety devices tested and demonstrated to your site contact, with documentation.

Replacement timing tip

If a tired door is limping toward failure, scheduling replacement in your slow season beats emergency replacement during your busy one — same door, same price, none of the downtime. We're happy to inspect and give you an honest remaining-life read.

Common questions

Frequently Asked Questions

Roll-up or sectional — how do we choose?

Headroom and use decide most cases: rolling steel wants little side room and coils compactly above the opening (great for tight interiors and security-first openings); sectional runs back along the ceiling and offers insulation and glass options (great for conditioned spaces and customer-facing bays). Our roll-up and sectional pages break down both; a site walk settles it quickly.

What's a duty cycle and why does it matter?

How many times a day the door and operator can run without early death. Springs are cycle-rated (10k standard to 100k+ high-cycle) and operators carry duty ratings for a reason: a door doing 80 cycles a day on hardware spec'd for 8 will spend its life being repaired. We spec from your actual traffic, not the catalog default.

Do you handle permits and code requirements?

Commercial door work can touch building permits, wind-load requirements, fire-rated assemblies and egress rules depending on scope and jurisdiction (Clark County and each city have their own processes). We'll identify what applies to your project during quoting and coordinate documentation — and be upfront about anything requiring other trades.

Can you match our storefront's look?

Yes — powder-coat colors on rolling doors, factory finishes and full-view glass sectionals for customer-facing openings. Restaurants and gyms in particular lean on glass sectional doors as operable walls; see also our glass door page.

Keep exploring

Related Services

Roll-Up Doors

Rolling steel in depth: curtains, slats, security.

Learn more →

Sectional Doors

Insulated and full-view commercial sectionals.

Learn more →

Operators

Matching the machine to the door and the traffic.

Learn more →

Spec It Once, Install It Right

Send us the opening dimensions and what moves through it — we'll walk the site and quote doors that match the duty.

Call (725) 237-6688 Request Service